 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FREQUENCY QEN62 Plastic J LEAD SMD XO - Communications Equipment Application Specification (Rev-F) Electrical Characteristics ......................................................P01 Mechanical Characteristics ...................................................P02 Ordering Information .............................................................P03 Suggested Reflow Soldering profile ......................................P03 Tape Drawing........................................................................P04 Reel Drawing ........................................................................P04 Frequency QEN62 Plastic J LEAD SMD XO - Communications Equipment Application Specification (rev-F) February 06th, 2006 Electrical Characteristics Electrical Parameters Frequency range Output logic Operating temperature range (see table 1) Storage temperature range Power supply voltage (Vcc) Frequency Stability (see note 1) Unit MHz Minimum 1 Typical Maximum 66.667 Test conditions HCMOS / TTL Output C C V ppm ppm mA -55 +3.3 50 -10 to +70 -40 to +85 +125 +5.0 100 5 Refer to Ordering Information Refer to Ordering Information Ref at 25C Refer to Ordering Information Aging (First Year) Input current (see table 2) Output load HCMOS load TTL load pF LS-TTL % ns ns 15 1 40/60 30 10 Refer to Ordering Information Duty cycle Rise & Fall time Start-up time 8 10 From 10% Vcc to 90% Vcc From 10% Vcc to 90% Vcc Note 1: Include 25C tolerance, operating temperature range, input voltage change (5%), load change (10%), first year aging, shock and vibration. Table 1 : Stability Codes 50ppm 100ppm -10 to +70C B A - 40 to +85C F D Table 2 : Input Current Frequency range (MHz) 1.000 to 23.99 24.00 to 49.99 50.00 to 66.667 Vcc=5V Cl=15 pF 20 mA 30 mA 40 mA Vcc=3.3V Cl=15pF 15 mA 20 mA 30 mA 1 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. Frequency QEN62 Plastic J LEAD SMD XO - Communications Equipment Application Specification (rev-F) February 06th, 2006 Mechanical Characteristics BOTTOM VIEW #4 #3 1.27 SUGGESTED PAD 9.8 max 3.81 1.27 #1 14.0 max #2 3.0 5.8 3.0 4.7 max 0.52 5.08 1.52 7.62 0.25 min #1 #2 #3 #4 Pin connections Tri state Ground Output +Vcc Tri state function Pin #1 Output (Pin #3) Open Active "1" Active "0" High Z Line 1 Line 2 Line 3 Marking QEN62 + stability/supply voltage/output code Frequency in MHz (6 digits) Date code (YYWW)+Manugacturing code Example for QEN62AAB / 3.6864MHz Line 1 : QEN62AAB Line 2 : 3.6864 Line 3 : 0547-N 2 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. Frequency QEN62 Plastic J LEAD SMD XO - Communications Equipment Application Specification (rev-F) February 06th, 2006 Ordering Information QEN62 A Part numbering system A B 3.6864MHZ Package type SMD Package QEN62 : Plastic J Lead SMD Temperature Stability Supply Voltage Output A : HCMOS 15pF B : HCMOS 30pF Nominal Frequency (MHz) Please enter the nominal frequency A : 100ppm vs -10 to +70C A : + 5.0V B : 50ppm vs -10 to +70C D : +3.3V D : 100ppm vs -40 to +85C F : 50ppm vs -40 to +85C Suggested Reflow Soldering Profile 3 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. Frequency QEN62 Plastic J LEAD SMD XO - Communications Equipment Application Specification (rev-F) February 06th, 2006 Tape Drawing Item Pitch of components Pitch of sprocket hole Length from hole center to component center Width of carrier tape Width of adhesive tape Height of component hole Width of component hole Gap of hold down tape and carrier tape Diameter of sprocket hole Diameter of feed hole Total of tape thickness Code P Po P1 W W0 A B W2 Do D1 K Dimension 12 4.0 2.0 24.0 11.5 14.65 9.60 1.75 1.55 1.55 5.60 Tolerance 0.1 0.1 0.1 0.3 0.1 0.1 0.1 0.1 0.05 0.25 0.1 Reel Drawing 1.5 25 Multiple : 1Kpcs per Reel O20.2 O13 Unit : mm O100 O330 4 TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost. |
Price & Availability of QEN62DAA
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |